Questions & Answers for: Sharp microswitch

clock is flashing - no other buttons will work Got microwave out of storage . . . clock is flashing but none of the buttons will work. Can you help me??? hi it sound like the keypad has died does ...

message on sharp ar501 copier. close finisher unit and finisher covers. Check the finisher covers sensor or microswitch.or anymore mechanical components deformation.

...is the on-off plastic push button that sticks through the case. When it is pushed, it activates a microswitch on the motherboard. Mine is broke and easily replaced (philips head screw), but I need

...micro for 3 years, lost manual in move. Please help. could be a broken door hook; defective door microswitch or the microswitch bracket itself. the door just may need adjustment; as many people ...

I have a Sharp Microwave R-520 KS. And it stopped working. I thought it was due to a latch problem. But now I am not sure. I took it apart -- and the latching and microswitches seemed to be working ...

...Oven.... Microwave Oven Basic Troubleshooting Tips heatman101 You probably have a bad door microswitch. There are three of them inside the unit that control lights, door interlock and ...

THE DOOR OPENER SEEMS TO HAVE A DISCONNECT AND HAS TO BE PRESSED EVER SO SLIGHTLY FOR THE MICROWAVE TO GO ON. CAN I FIX THIS? There are three microswitches in the door latch assembly. One of them has ...

...is over the stove it has to come down. Table top, case has to come off. The monitor switch is a microswitch that is part of the door switches. PLEASE UNPLUG YOUR UNIT BEFORE WORKING ON IT. When ...

sharp microwave not working but tray rotated when door opened Check microswitches.

...The Opti-Glo? Two things; the "new" batteries might not have enough juice to power the light or the microswitch activated by the button is dirty.You could try looking for the contact point where the ...