Questions & Answers for: Brother microswitch Computers & Internet

...is blocked very common, what sort of inks were used? Not economical to repair, buy new! There is a microswitch in the ink detector on the right hand side of the ink cartridge holder. SOmetimes this ...

two hooks are connected by a rod so they will both get elevated and the right hook will actuate the microswitch when the cover is closed

can send but cannot receive fax Please help. My Brother IntelliFAX 775 will send faxes but cannot recieve. I can hear a clicking noise like it is trying to operate but nothing comes through. Also, I ...

...the printer keeps saying no cartidage installed. What do I do? Beside of the black ink there is a microswitch, I think that is dirty, you can replace or clean

...Cover Open message Open ADF and close again. There must be tab in the ADF which is not pressing a microswitch located in the lower part of the ADF. IF you can locate it, try pressing it

...hole in the machine casing and a small peg on the lid The peg goes through the hole and activates a microswitch If you can see the hole and use a torch you will be able to see the microswitch lever , ...

...does not clear the message, you may have a broken actuator fin on the door that cannot close the microswitch which makes it think the door is still open. Thank you.  I found the paper jam by ...

Why does the paper light keep blinking even though paper is loaded correctly in the tray? Check the microswitch inside the printer paper tray. Turn off the printer first and unplug it. There is a ...

remove paper jam but have checked all trays and still showing a warning the there is a paper jam one of the trays or microswitches is out of alignment..

...cartridge. If you have recently changed the cartridge it may not have triggered the Toner Reset microswitch. The reset gears on the side of the cartridge will need to be changed back to the ready ...