Questions & Answers for: Saeco microswitch Computers & Internet

...machine at all ! the various lights are controlled by either magnets that hit various sensors or microswitches. the dreg light i'm pretty sure is a microswitch. Its pretty common for them to go

...nothing happens, at first it would make the usual noises and nothing would happen. sounds like a microswitch is out. needs to be brought in for service. No easy way around it. there's 3+ ...

...the central unit and give it a good clean. The dregdrawer should then slide back fully into the microswitch. If this doesn't work, you've probably got a dud

...the machine has power, The first thing to check is that the front door is closed. There is a microswitch to the right of the brew group that gets depressed by a tab on the top of the door. If ...

...make the machine think that the group is in place. Solution: This can be done by locating the three microswitches that need to be set. Turn machine on/Open the door/insert wastetray&dredgebox ...

...see if the problem fixes. this happens because there is a little door in the grinder that hits a microswitch that tells the grinder to stop grinding. This is supposed to happen when the grinder ...

...I completely cleaned the grinder, cleared the coffee chute and the trapdoor and checked the microswitch behind the trap door, it is clicking on light pressure. Hello, I had exactly the same ...

...group blocked The flap of the funnel has a piece of plastic that sticks out, which pushes on a microswitch under the top cover.. If the funnel is not seated correctly, it will not work the ...

...and why does the red bean light come on? (Besides the possibility of being clogged) there is also a microswitch which controls when there is enough coffee. If this switch isn't working properly, the ...

...a while but now it is doing the same thing again. hi you probably have a problem with one of the microswitches either door ,dumper or gear wheel . try to press the door when it happens see if it ...