Questions & Answers for: PRINTER paper stuck Computers & Internet

paper goes through. If one is stuck or trapped with even a tiny scrap of paper then you will get a paper jam error. Whatever printer you have, start looking for these sensor flags and ensure that they

...paper stuck in but shows paper jam on the screen Removing all paper on trays Have you tried turning your printer off then on again, sometimes this clears the message. If this doesn't work, there may ...

scx-4z16f is pickup multiple pages at one time The paper may be stuck together because of humidity or having been cut improperly by the paper maker. Try fanning the paper before you put it in the tray

...STUCK IN THE PRINTER AND CANT GET IT OUT Turn off, unplug, and open the printer. Wait for some time to let the printer cool down. Pull out the print cartridge, if you do not see the paper jam. Gently ...

...tray was empty. There probably is a small piece of paper stuck in the paper path. Please take the ink/toner out of the machine and check the paper path. Please turn off the machine before doing

paper stuck anywhere. If the paper tore, and there are any pieces stuck in the rollers somewhere it will still mess it up...you have to get any pieces out of the printer. You didn't put any details or

...paper can get stuck in areas that you cannot reach easily. It happened to me when I was working on an hp. printer. I had to remove the manual feed assy. in order to remove a small piece of paper that ...

...cycle the power to the printer to see if it clears. If it does not clear, you still have a piece of paper stuck somewhere inside. If you can't find ANY paper stuck your printer may need to be

...paper and not stuck. Hi, Please check it well, even a small piece of paper may cause this problem, second switch it off unplug, remove the driver from the pc, re connect the printer to the pc and ...

...stuck like a wrinkled or torn piece of paper in the path and needs to be removed before it can send another paper or it will keep jamming you didn’t give name of model but if it’s this one try page ...