Questions & Answers for: Zebra parallel set in use Computers & Internet

...parallel. Be sure that the baud rate and data/stop bits are set the same on the printer and interface converter. Generally speaking, use the fastest setting possible (19200 baud) unless you encounter ...

...parallel port. The dip switches are set to disable override. Calibration and print of configuration works fine - but I can't get it to print a test page (or any other label). The data light comes on ...

...set the printer back to defaults but not the factory defaults. We do have the latest drivers for it installed as well. Any help would be much appreciated. Thanks in advance. Good Day I trust that you ...

Panasonic KX-P 1180 cannot print properly with win XP Pro SP2 Hello I connected KX-P 1180 parallel port) and loaded XP driver. But the printer cannot print the test page properly. I changed setting ...

Zebra Designer drivers but this introduces other difficulties.Is there a way to set this unit back to the Factory standard for the parallel interface? go to www.zebra.com and download compatible drive

set up through a parallel port (LPT1) and the other setup through a serial port (COM1). No problems with the printer running through the parallel , but cant get the printer with the serial cable to go

...you have the comms set correctly 9600, n, 8, 1 and print to that port, you will find it clearly marked in Device Manager. You can get a parallel to USB cable then you can use your driver set to ...

...set the printer back to factory settings as long as the printer is in page mode. The command is not supported in line mode at this time. The command is case sensitive. Syntax: ^default. You can send ...

How do you change settings for this printer to recognize usb. I changed the cable to use parallel to usb with windows 7 64 bit. Thanks Read this: https://support.zebra.com/cpws/docs/usb/usb_print.htm

...set service print in services.msc to automatic 3. Add parallel port (I dont know how it help when adding parallel port) 4. Net use mapping parallel port to usb port (I dont know if it works) 5. ...