Questions & Answers for: Sharp print copy computer Computers & Internet

print out two sided manual from online. Manual downloads but when printing should start, copier seems to start but then stops as though job has finished. I've opened printer job status & it goes from

print command for any page with multiple copies i.e 2,3 or any number more than 1 than only 1 copy prints & for the balance copies i get an error message " Printer cannot send data to the computer....

...computer, but when we try to copy something everything is too dark--even the blank area around the item to be copied is dark black. The charge wire is clean, and everything in that area is good. The ...

...print something and this happens then it is inside the machine Probably toner or developer dumping... Take a few pieces of large white paper and cover the entire glass surface... make a copy is the ...

...print same with good quality and no lines. Assumed that machine would use CCD to scan image as well as copy but what do I know. Took chance and replaced CCD but unit still exhibits same problem. ...

print but not copy? Is it infax mode? Do you get a green Start Button? Are there any error codes diaplayed when you push the button? If no to these, unplug the machine for several minutes and restart.

...copy have the lines then most likely the lines are coming from the drum unit. If you have the copier hooked up for use as a PC printer then does the print from the computer have the lines as well? ...

print all colors from a computer system, but when you make photocopy that has black write up, the copy will come out blank. I have service the drum units, cleaned the card on the main board, but still

...8 1/2 inch paper. I put in a new drum and toner -- same problem. drum and toner not the problem. is this a issue with printing or copying or both does this happen when you print from the

Replaced Drum, MC unit, toner & developer. can copy but will not print HAVE YOU TRIED DELETING AND RE-ADDING THE PRINT DRIVER TO YOUR COMPUTER ?