Questions & Answers for: Samsung SyncMaster program pcb

getting lines across the monitor screen I have a Samsung monitor hooked up to a Dell Dimension 8300. The monitor has begun showing lines through the screen, sometimes so many the features are hard to ...

monitor automatically turn off. not working properly. Hi, sounds like a few capacitors are going on the main PCB. You will need a technically inclined helping hand or send it to a shop.

Screen went white with a few broken lines. Replace the fuse on the scaler PCB - it is located on the display itself under metal cover - that it the board where flat cable from processor PCB comes into

Black screen with power switch flashing blue. I have been same problem but in other type syncMaster, the solution is open your LCD monitor look for power supply module (PCB which have connector to AC ...

...program starting normaly. what is the problem ? I have been same problem but in other type syncMaster, the solution is open your LCD monitor look for power supply module (PCB which have connector to ...

display powers on but display goes blank after 2 or 3 seconds. you probaly need you power pcb repaired or the invertor replaced. sometimes the backlights burn out.

can't display can't displa. check pcb fuse,and change capacitors 330mf/25v, 680mf/25v......

my samsung 540n monitor wont display only white light, how to resolve it? if only white display is appear on screen it's means the problem is in main pcb section. its may be a loose contacting of the ...

my monitor plugs in blue power button blinks why ? There is probably a failure of part of the power supply pcb. If the light blinks and the screen is totally dark, this is the likely cause. The usual ...

Samsung sync master 740N no display. Flickered started then the display goes after its been on for a short wile. Could this be a problem with the capacitors? Yes, look for two 1000uf capacitors on the