...the printer every six months (or after about 300 hours of operation). 1. Turn the printer OFF. 2. Remove the paper from the path. 3. Open the access cover and remove the pull-up roller assembly. 4. ...
...How does one change either of the rubber studded tracks that advance the paper underneath the drum? Remove the case. This is done placing the tip of a flat blade screwdriver in the the slots on the ...
c9600 tray does not lift up chweckcthere is not any paper jam . remove inkcartrdge then check .aslo check in back side of printer .may be there is paper jam. remove paper if jammedup.let me know.
Question about C3400n Laser Printer
oki c3400n all 3 lights are flashing amber 2 times a second oki c3400n all 3 lights are flashing 2 times a second. A paper jam was in the fuser and I removed it, but now all the lights are flashing 2 ...
Oki B4540 keeps saying Oki B4350 keeps saying "paper jam, remove toner"...paper is not jammed though. Just wondering whether I've installed the toner incorrectly.Not sure if the 2 small pcs. of clear ...
error: open upper cover exit jam Feed Jam or Exit Jam 1. Remove the tray and clear any misfed sheets as given above. 2. Open the top cover. WARNING! The fuser area will be hot. This area is clearly ...
change brake bulbs on BMW 5201 Tourer inside loading space remove internal trim and expose light cluster, remove thunb screw and pull out light unit replace appropriate bulb , reverse to rebuild.
Question about OKIFAX 4580 Plain Paper LED Fax
am unable to print . MESSAGE on screen says check drum cart. I have removed cartridge and replaced and removed drum cartridge but the message remains on screen I have turned it off removed cartridge ...
paper jam this is not a good printer.remove the paper tray and open the top cover.Remove the drum cartridge and remove any paper. you may also pull down the tray in the front of the printer and look ...
Question about Okidata 321 Turbo D Printer - Factory
how do u remove the roller bar that the paper feeds thru if something is stuck underneath it? Step 1 (1) Pull off the platen knob 1. (2) Open the access cover Assy 4 toward the front to remove. (3) ...
Usually answered in minutes!
1 Questions
2 Questions
2 Questions
1 Questions