Questions & Answers for: Shure how do i remove the delay Computers & Internet

Access switches Someone pushed the switches in so they are not workable. I need to find out how to remove the printed circuit board and see how to put the switches back where they belong. I have the ...

Removing the switch/ button How can I remove the switch of a shure PG58 microphone so as to connect the wires from the three pin connector? popo the switch out a solder a pice of wire that bridges ...

...I say has a delay on the pick up. If the audio is being run through a "noise gate", that is what clips the first part of sound. Reduce the attack time of the noise gate or remove it from your

there is a rattle in the mic body as if there is a tiny screw loose Try removing the XLR connector and removing the cartridge to see if there is anything loose inside the handle.

...to get it out... Any help would be appreciated! There is a bezel around the switch. You'll need to remove the bezel and then the switch will fall off in your hand. At that point, you can remove the ...

I HAVE A SHURE PG 57 MICROPHONE. HOW DO YOU REMOVE THE SWITCH, TO ATTACH WIRE Use a screwdriver to pop off the switch actuator from the front of the microphone. Then, the oval, black sticker that has ...

after removing the round end, is there a filter at top of body about the size of a quarter? Yes, there is some foam on the top of the cartridge once you remove the grill.

remove antenna cover Carefully remove the bezel that surrounds the switch. Wiggle the dome cover back and forth to remove the antenna cover.

how remove the Shure BG 1.0? Thank you. Remove from where?

how to dis-assemble wireless ut2 Remove the switches. Remove the caspule. Remove the C Clip that was under the capsule and the circuit board slide outs.