Questions & Answers for: Elo replace hp touchscreen Computers & Internet

Question about (822636-000) (Gray) 15" CRT Monitor

1 Answer

...still same. Any ideas? try to recalibrate if this doesn't work, the touchscreen glass needs to be ...

Ad

Question about Elotouch 17" LCD Monitor

2 Answers

...HP PE1229 Monitor and it worked but I found an ELO 1725L with a broken touch panel on eBay and it fixed the problem permanently. I tried the fix where you replaced the card but it only fixed it for ...

Ad

Question about Elotouch 17" LCD Monitor

1 Answer

touchscreen stays black, but the beep works I tested another screen on the same port, but that works OK. The ELO is the second screen on my PC. It doesn't even come up with the windows startup screen,

Question about Entuitive 3000 Series 1747L (Black) 17" LCD Monitor

1 Answer

1747L I need the main board PTB-1195 66832119500-01 for this ELO ET1747L touchscreen monitor. Do you know where I can find these boards? I got one ....pirate_4200@yahoo

Question about 15" Touch Monitor

1 Answer

touchscreen feature doesn't work on my hp iq770. Have gone to control panel and re-enabled the touch screen but to no avail. any tips? check all the cable connectors, reinstall the driver, if all else

...the touch? I have the same problem touch screens not responding to the touch, we have to do severals times and then it's respond??? is the screen worn? you might need to replace the touchscreen ...

Question about Touchsystems (Black) 17 in. Flat Panel LCD Monitor

1 Answer

ELO 15IN TOUCHSCREEN MONITOR POWER STAYS ON ,MONITOR COMES ON FOR 4 MINUTES , THEN THE PICTURE CUTS OFF. WHAT DO I NEED TO REPLACE? inverter and/or back light

Question about 1525L 15" LCD Monitor

1 Answer

...touchscreen wont react to touch. the other two thirds misreads finger touch by almost one inch to the left of finger yes it may possible that a spike may came and damaged the sensitive chip you are ...

Question about 1529L (F23779000) PC Desktop

1 Answer

...It has worked fine for over a year. sleep mode / goes dark ? Probably the inverter needs ...

Question about CarrollTouch touch-screen Monitor

1 Answer

does not work on the edges, can not access start by touching. when the screen is touched the arrow appears about half an inch away Sounds like the calibration for the touchscreen needs to be reset. If

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...