...from her father. He said that it worked the last time he used it (who knows when that was). I have replaced the batteries. The camera will not advance the film. The advance lever on the case can
...manuals for every model since the late 50's. The free downloads are B&W low res,but you can order replacement manuals too. They might even have some ME-Super manuals
...knob or shaft, just screw it on clock-wise. If the threads are stripped on the shaft, it must be replaced, same with knob. To replace the shaft (if the knob is off) just pull it down in the film ...
...replace a rewind shaft on a pentax k1000? bremerfamily, to remove the shaft, lift the knob until the film door opens, place a small screwdriver between the prongs and turn the knob to the left. pull ...
...rewind. I have fitted a new battery just in case but it made no difference. Thanks for any info Tony Butterfield Hello The problem is that the lens has become stuck in the barrel. There are some DIY ...
...i unfortunately could not find it. Is there anyway to get the film out of the camera before I get a replacement piece? yes, after dark find the darkest room or closet you can find, make sure no light ...
...to unscrew. Inspect battery and housing, remove any corrosion with brush, match battery and replace. May have to go to camera shop for battery, or try online. If new battery does not release ...
...with the camera. Where can I find this part? Please help. You'll see both the Pentax part and two replacement parts on ...
...rewind the film. Usually, it will pop back out again if you operate the film advance lever, but your camera is now around thirty years old so it's highly likely that the internal lubricant films ...
Usually answered in minutes!
19,136 Questions
12,215 Questions
7,310 Questions
7,276 Questions
5,470 Questions
