Questions & Answers for: Compaq server boot up Computers & Internet

Question about ProLiant DL380 Server

3 Answers

...boot Server starts booting and stops. Turns off and re-start again.. WWill not boot but goes on and off... turned out to be a bad processor. put in a different one and it booted right up. Could be ...

Ad

Question about V 510 Monitor

0 Answer

...server boot$log.err 10-18-2007 5:11:06 pm BOOT$LOG.ERR was deleted at startup and a new file was created. 10-18-2007 5:10:06 pm - SERVER - 5.70--1: Running CDBE consistency check on the NetWare ...

Ad

Question about ProLiant ML530 Server

4 Answers

server. Boot into the Bios and check that the CDROM boots before the HD. Insert the CDROM Smartstart into the server and restart. When SS comes up you can use the array erase utility. Erase the array,

Question about ProLiant ML530 Server

2 Answers

Server and dont have a scsi hard disk i want to know when i install a ide harddisk it does not detect the disk There are many configuration settings, although i personally would hunt down an SCSI hard

Question about Digital Server 5210 (FR-J2B7W-AA)

1 Answer

Digital server 5210 How do I get the software and drivers as I have brought this server for 99 cents on ebay it boots up but needs an operating system want to sale it no you can try a new os this ...

Question about Digital Prioris XL 590 (FR-795WW-XC) Server

1 Answer

server which will not boot is it worth repairing 1 check BIOS, 2 check for Boot virus, 3 check for RAM card failure 4 you can use Killdisk or wipedisk to clean the disk and reload the OS try all these

Question about ProLiant 5500 Server

1 Answer

All boot processes seem okay and the graphical screens operate, but just after the desktop loads the screen goes blank boot the system in safe mode and change the display settings from there

Question about Presario-Notebook 700 Series, 2500 Series, x1000xx Series, R3000 Series LCDs Displays - 33700 (337005001) CD-ROM Drive

1 Answer

...boot-server". The "media test faiure, check cable" reports that no network-cable exists, or that it does exist WITHOUT being connected to a boot-server. Probably, your computer failed to boot from a ...

Question about ProLiant DL380 Server

1 Answer

...then go into the advanced boot tab and change the boot order (it should be CD->HDD->Pxe->Disabled by Default). After that, restart the server and wait for it to boot from the

Question about Presario-Notebook 700 Series, 2500 Series, x1000xx Series, R3000 Series LCDs Displays - 33700 (337005001) CD-ROM Drive

1 Answer

...boot-server" on your local network -- it can load Windows from that "boot-server". The "media-test failure" indicates that there is no network-cable attached to your computer *AND* the other-end of ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...