Questions & Answers for: Polycom server boot up Computers & Internet

...boot server" after that "error, application not found. help me to reset that phone. This means the phone's SIP application has been erased. You will need to download the SIP app and BootROM from the ...

...a boot server, and then point the phone to this server from the server menu so the phone will reboot and download the files. ...

...boot server, and does not have one loaded in its own flash memory. You will need to configure a boot server to host the SIP software, BootROM, and all the config files (these are included in with the ...

...at all.pls guide me how to fix this problem. Can you pls check the configuration file on the tftp server some wrong information is there pls compare with any other ip ...

...boot all the way. Now that you have access to the Admin menu you can disable the DHCP server option and assign an IP phones address, Subnet Mask, and IP Gateway. Then under server menu, enter FTP ...

if you feel comfortable enough setting up a FTP/TFTP boot server to re-provision the phone, as this option will erase everything, and then all it'll do is get stuck in a boot cycle until reprovisioned

...boot server current configuation" Any ideas? try to turn off the Polycom device. When you turn it back on, press Setup. from the options, select server then click edit. Then select the item Trivial ...

...boot_server_error " This occurs when the phone is set up to load it's configuration file from a ftp or tftp server and it cannot find the file or server location. If the phone is supposed to do this, ...

...boot server error loading 0004f217b421.cfg This occurs when the phone is set up to load it's configuration file from a ftp or tftp server and it cannot find the file or server location. If the phone ...

...boot server. The problem is that it keeps on rebooting, no reboot server, use existing configuration and error loading ......cfg How can i boot it so i can configure the SIP to connect to the voip ...