Questions & Answers for: steam button Irons

steam button wont push down i cant get any burst of steam because the steam button wont push down. i dont seem to get any steam at all even at the highest setting. can you please help me. how do you ...

...handle. Usually, these are located on the sides of the handle. I cant get steam to come out of press I have followed the instuctions keep pressing the steam button but still no steamthe temp is at ...

...steam button at last time 32 times & no steam came out. The iron/steamer gets hot & irons but won't steam. Can you remove the steam button if you can fill with water heat to maximum and holding over ...

...steam button is built into the handle. Push the button and you have steam. Hi. We just got the 660 steam fast. We found the red steam burst button. We are just not happy with being able to use the ...

...steam button and letting it go through. Eventually it fixed it and the constant steam stopped. Something to do with a piece of limescale blocking the solenoid but that's all Greek to me! Hope this ...

...steam button down, on both the iron and the unit for well over 20 seconds, still no change. Can antone help? I had same issue , now , once you turn the unit on , you should see displayed 3 steam jets ...

steam button not working tefal protect concept iron steam is not working after a ******* sound & steam coming from base hi! Long time listner, first time caller. Iron not steaming AT ALL. I have a

Steam button broke? The steam button no longer engages, as if the plastic on the inside of the button that depresses to allow steam to flow has been broken off. Is there a replacement part for this? ...

...steam button & turbo button a few times - WARNING: make sure iron is facing downwards and cover ironing board with old rag because initially brown steam splatter will come out on first few steam ...

...steam button on the bottom of the handle and I could stop the steam by tapping the upper steam button, but now both buttons have the same problem. It's like something is loose? Question edited for ...