Questions & Answers for: Milwaukee Tool universal plus Computers & Internet

8amp Super Saws all-shuts off after a minute of use-no power It's probably tripping the thermal overload. You may try blowing it out good, might be full of saw dust if your cutting lots of wood.

Sawzall model 6507 goes dead when horizontal. roudy45176 suggested: One of the pins for the quik lok was loose and pushing it down (way in) did not tighten it or correct the problem. Loose wire ...

Please....How do I remove a quick loc cam from a 10 amp Sawzall? Blade is stuck and will NOT come out with pliers etc. Take this link to Milwaukee website and scroll down to requested instructions. ...

i have a bad resistor in my milwaukee charger (model 48-59-0255) and i cant identify the color bands. can someone open their charger and tell me the color bands on resistor R29 please? Brown black ...

Motor on my sawzall 6572 runs but blade does not move. Blade locked in tight. No reciprocating motion. The gears are stripped internally in the saw...it will need to be repaired.. heatman101

...plus 9.6volt-18 universal charger for nicd/nimh batteries and stop working after leaving it plugged in to the electrical outlet. i think it could be something simple, any suggestion on what to check ...

...plus 9.6-18 volt universal charger into a plugin the light on the charger will come on for a few seconds and then will go off not charging sounds like the charger is shot- if underwarnty turn it in. ...

Power plus carger 48-59-0255 does not charge batteries no power to light indicater batteries are new Thanks Robert diuagrama del board

what is Fixya FIXYA is a technical support site that if you have a problem someone will try and help you or direct you in the right direction to get your problem solved.

my charger will not turn on nor charge . Milwaukee 48-59-0255.... will not turn on nor charge.... The unit has a fuse mounted inside on the board. If you don't know electronics, I would replace the ...