Questions & Answers for: Simer utility pump Computers & Internet

how do i take the motor out of a simer pump 2305 after removing the screen cover on the bottom? I threw it in the trash.

...utility pump and how much? I have a model 2300 The Simer brand of submersible dewatering pumps rely on being fully submersed in water for proper cooling and for the seals to remain water tight and ...

Model 2305 pump. Housing is cracked. Can I buy Model 2305 pump. Housing is cracked. Can I buy new housing? since the pumps cost is only about $40 i doubt that they make after market housings for it ...

...utility pump Model 2300-03 motor sticks. Only pushing the impeller makes it to work. Is there a repair kit relating to this problem? take screws off the screen on the bottom of pump.....clean ...

My Simer 2300-03 has been great except that it overheats after awhile. Too little water?? Yes. I recently used a similar pump (Flotech 1/6 hp) running for about 24 hours - but it came with this ...

what kind of oil is in the motor of model 2300 simer geyser pump? Can I buy oil and fill it up? I took it apart because it was clogged and all of the oil ran out, I'm not dumb, I just do dumb things ...

Brand new Simer pump Model 2330-03 runs 10 seconds shuts off, turns back on, runs 10 seconds shuts off, etc., etc. Why is this happening? Sounds like a faulty switch on the float. Try to hold the ...

My utility pump hums but the impeller doesn't turn,if I turn the impeller by hand it sometimes will turn.Can this be repaired? Probably easier and cheaper to just replace the pump

instructions for simer gyser pump Must have got it working.

I have a Simer 2305 and the pump will run but does not when the water is low? Pumps such as the Simer 2305 do not pump water totally down to ground level. They are designed so they do not suck up ...