Questions & Answers for: Ricoh wrong tray Computers & Internet

...wrong with bottle where can i get a toner bottle sensor The toner bottle sensors don't go bad too often. Do you have an extra yellow toner bottle? Try replacing that first. Compare the tray where the ...

tray where the prints exit. Check also the exit sensor/feeler condition. Good luck and please rate me, thanks. Where the paper EXITS just tap the black springs. Its a physical thing. All other answers

wrong tray on the Ricoh C410 DN When printing a multiple page letter, the first page should be tray 1 and the rest are set for bypass, but they all come out from tray one no matter which setting I use

...tray other than "plain", or perhaps the wrong size, so the printer needs you to override the setting. Check the settings. You can find out how on pages 24, 25 of the "operating guide". Go to the ...

wrong size paper jam. It seems to think it has a longer size paper.The unit continues to think it is running 8 1/2 by 13. The tray has the correct setting 8 1/2 x 11, The menu does not offer a 8 1/2 x

...tray 1 and 2 If the paper is "Z' folding at the reg. roller you may need a new reg. clutch or you may clean it. If it "Z" folding in the fuser, you may have a pick off claw that is in the wrong ...

...tray in the wrong direction. How do I get it out? The duplex has a button on the upper left, open that. When that is open, the main door has a button on the upper left, open that. This should expose ...

...tray 2, and one thing is that your printer paper location are may be wrong that why when you try to print it will take time searching paper..and also check your pritner quee there is if any pending ...

...tray (the paper will only move about 1-2cm). Can you help? You should get it checked by an Authorized Service Professional. If this doesn't do, check if your paper is of a compatible weight (GSM) ...

...tray, go to print button, rest job, select "all" job and confirm. keep doing this untill there is no more print jobs showing on your screen, then go to your PC and set your default printer to this ...