Cycling - Recent Questions, Troubleshooting & Support
I need a left side crank for a BICYCLE roadmaster 700c
spare parts.ask.
Replacing the Left Crank on a Road master 700c Bicycle
- Check Your Crank
- Note the crank length (usually 170mm) and type (square taper or splined).
- Make sure it matches your bike's bottom bracket.
- Where to Buy
- Official Parts: Sears Parts Direct - genuine Road master cranks.
- Aftermarket/Generic: Amazon, eBay, Performance Bicycle, Westwood Cycle - aluminum alloy cranks that fit many bikes.
- Key Tips
- Confirm crank length and interface type before buying.
- Take your bike to a local shop if unsure about compatibility.
- Installation
- Remove the old crank and install the new one in the same way, making sure it's secure.
9/22/2025 11:31:36 AM •
Cycling
•
Answered
on Sep 22, 2025
Assembly instructions for 16 starburst/magna bicycle
Unpack & inspect all parts-frame, wheels, handlebars, pedals, training wheels, seat, fork, reflectors, tools.
Attach handlebars and stem-align the marking and tighten securely.
Install front wheel-fit into the fork dropouts, secure with axle nuts (or quick?release).
Attach pedals-right pedal threads clockwise, left counter?clockwise.
Mount saddle and seat post, adjusting height and tightness.
Adjust training wheels/chain guard/brakes-ensure alignment and safety.
Inflate tires to recommended pressure, test brakes, secure reflectors.
7/3/2025 9:02:07 AM •
Cycling
•
Answered
on Jul 03, 2025
Do you have a manual for home repairs/maintenance?
If you have a Shimano drivetrain, then go to techdocs.shimano.com/techdocs/index.jsp and you can see their EXCELLENT tuning and adjustment info, or you can go to parktool.com/repair and view all of the general bike repair guides they supply.
Hope this is helpful,
matt
2/19/2025 9:43:35 AM •
Cycling
•
Answered
on Feb 19, 2025
I have a V-Max MPE Fitness Exercise bike at home,
Perhaps you have already looked, but most items that take an AC adapter have a label on them near where the adapter would be connected that specifies the input volt/amp combination that is required. Other than that, you might contact the manufacturer. I would also be unusual if there were not some sort of label somewhere on the bike that does not note the manufacturer and model. = I’m happy to help further over the phone at
https://www.6ya.com/expert/donald_f2ed37026a3ac881
1/7/2025 12:34:27 AM •
Cycling
•
Answered
on Jan 07, 2025
Light not working
Your light may be in lock mode, press the power button for several seconds and the button should turn or flash blue. Normal operation should be available. If this doesn't work, you may have a defective unit and will have to return it to NiteRider for warranty.
How to set the combination on a Blackburn ANGOLA COMBO CABLE LOCK
Open the lock using the original combination, which was 0000 for mine. Once open, you will find two tabs on the lock side--on top and bottom of the lock portal. Push in both tabs, and hold them down while you set the new combination. Once it is set, put the post back in to make sure it is still open. Twist the dials to lock it, and then you should be able to unlock using your new combination.
Vanagon brake pedal problems.
9 year old question. Virtualy unknow model, not mentioning 'VW', posted to the category 'Avid Juicy'. It is no wonder it wasn't answered.'year make model', first 3 words in the question please. There is a blanket category for 'Volkwagen - Cars and Trucks'.Modern Cars with ABS have to be pressure bled of air from the wheel upwards because of the ABS Valves. you have airlocks.
https://www.google.com/search?q=Vanagon+brake+pedal+problems..
Not finding what you are looking for?
