Car Audio & Video - Recent Questions, Troubleshooting & Support
Vr3 200watt amplifier red light problems
Why does the Power / Protect LED switch between green & red?
Suspect the power and ground connections, insufficient wire size to carry the current demand,
or an improper impedance load (especially if bridging two channels into one.
Why does the Power / Protect LED stay red?
This typically indicates that one or more of the MOSFET output transistors has shorted
This is straight out of the user manual.
My amp automatically goes into protect mode
There are 4 reasons an amplifier tries to protect itself.
Overheating - thermal shutdown.
Over Impedence - The subwoofers installed are not configured into a load the amplifier can handle.
Output is grounded - a positive wire strand may be touching the ground terminal - a wire may be shorted, or a speaker voicecoil is blown.
Intennal problem - Output on amplifier blown, or some other component has failed.
Check your wiring to the amplifier again - if all is good - disconnect the speakers and try to power on. If the amplifier turns on normally - test the speakers for blown coils.
If the amplifier still goes into protect mode - the problem is internal and needs professional repair.
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
KENWOOD RADIO CODES
try this
KENWOOD SECURITY CODE CLEAR procedure
Your radio will require one of the following procedures.
Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
Then using your remote enter your code.
Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".
Then using your remote enter your code.
Type 3
Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display.
Then using your remote, enter your code.
Enter your number from the remote control unit. Your code number is 5227 (KCAR)
* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key
* Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key
The security is canceled and the set enters the TUNER mode!
9/24/2025 7:38:35 AM •
Kenwood...
•
Answered
on Sep 24, 2025
We were just given a Venturer 20 cd changer stereo, model TK6800. I cant find anytbing on the web about it. Would like a manual if possible. Or at least how to turn down the bass?
You can find manuals for Venturer CD players-including models similar to the TK6800-on a few dedicated sites that host user guides:
?? ManualsLib
They offer a large collection of Venturer manuals across various product categories. While TK6800 isn't listed directly, you might find a similar model that shares functionality.
?? Browse Venturer manuals on ManualsLib
?? All-Guides
This site lists several Venturer CD player manuals, including models like DM8300 and DM8721. If TK6800 is a variant or rebranded version, one of these might be close enough to help.
?? Explore Venturer CD player manuals on All-Guides
?? Manualsnet
Another good resource for Venturer player manuals in PDF format.
?? Search Venturer player manuals on Manualsnet
If TK6800 doesn't appear in any of these databases, it might be a region-specific or discontinued model. In that case, I'd recommend checking the unit itself for alternate model numbers or contacting Venturer support directly.
How do I set the clock???!!!
I just figured out the date and time settings on the NA 3600 Nakamichi deck. 1. Tap settings 2. the icons along the bottom has more options when you slide them to the left. 3 find the clock 4 You're welcome... ;o)
Which cone for bazooka 10 cs1004 speakers?
If you mean you require a replacement 10" sub transducer, any of the following will fit.
Try to go for the highest sensitivity.
http://www.lightav.com/car/bazooka/subs.html
Not finding what you are looking for?
