1
Anonymous wrote a tip for Exercise & Fitness:
"If you are not quite sure about the speed/elevation of your machine you can perform the..."
Anonymous
Anonymous posted an answer for this Proform CrossTrainer Treadmill:
"Proform EKG Cross Trainer Treadmill-will not operate since it has been moved. When the..."
AnonymousAnonymous posted an answer for this Proform CrossTrainer Treadmill:
"check to see that the speed sensor did not move with the actual relocation of the machine...."
AnonymousAnonymous posted an answer for this Exercise & Fitness:
"e2 normally refers to error in the speed sensor - iff the treadmill starts moving and then..."
AnonymousAnonymous posted an answer for this Exercise & Fitness:
"The belt on my 68600F EverYoung has quit turning. The display screen is still on and says..."
Anonymous
Anonymous posted an answer for this Epic Overstock T60 Treadmill Treadmills:
"first thing is to get yourself an appliance load tested that can measure amperage draw..."
AnonymousAnonymous posted an answer for this Epic Overstock T60 Treadmill Treadmills:
"my treadmill does good under speed level 3 (which is good for slowly walking)- if I go..."
AnonymousAnonymous posted an answer for this Exercise & Fitness:
"good evening, hope all is well with the experts! here is the problem with my golds gym..."
AnonymousAnonymous posted an answer for this Exercise & Fitness:
"if the motor is still turning and the belt is not moving then you have two things it could..."
Anonymous
Anonymous posted an answer for this Proform 590T Treadmill:
"Every time I put the key in my Proform 590T, the incline rises for a second, and lowers..."
AnonymousAnonymous posted an answer for this Proform 590T Treadmill:
"how long have you had this treadmill? usually when the hash marks appear it means that the..."
Anonymous
Anonymous posted an answer for this Nautilus Commercial Series T916 Treadmill:
"you will need silicone lubricant with an applicator wand and all you have to do is lift..."
AnonymousAnonymous posted an answer for this Nautilus Commercial Series T916 Treadmill:
"need to lubricate the bell of my treadmill . how i do that..?"
Anonymous
Anonymous posted an answer for this Dmm Vision Fitness T9500 Treadmill:
"I am getting a noise that increases with speed. I replaced the front roller so it should..."
AnonymousAnonymous posted an answer for this Dmm Vision Fitness T9500 Treadmill:
"have you removed and cleaned the wax buildup off the rear roller? typically with the wax..."
AnonymousAnonymous posted an answer for this Dmm Vision Fitness T9500 Treadmill:
"first thing to do is to enter the calibration mode. First remove and replace the safety..."
AnonymousAnonymous posted an answer for this Dmm Vision Fitness T9500 Treadmill:
"I have a vision fitness T9450 treadmill. My wife was using it and it slowed to 2mph. That..."
Anonymous
Exercise & Fitness 8 answers
