Questions & Answers for: burner knobs Computers & Internet - Page 3

...burner knobs? when the control panel is locked are the burner knobs still "live" for child safety i would prefer not hi, Unfortunately if they are knobs they may still be "live" when the panel is ...

removed burners for cleaning, flame erratic After removing, cleaning, and replacing burners, flame is wanting to kick back through air adjustment holes behind the control knobs. Ducane 5004 looking ...

...burner rings. Remove control knobs. In the event that the hob is built in, undo the bracket clamps underneath the work surface. Lift the hob on to the work surface. Unscrew the venturis on the ...

...burner. Each of the other three knobs do cause a spark at each of the four burners at the same time. If this cooktop was better designed this would never have happened. There is absolutely nothing to ...

burner igniter will not spark on any of the burners, but all the other control knobs work just fine for all four burners. I am guessing that the igniter module on the back of the stove is the problem.

knob to right rear burner got oil on it. Burner iniitially would not turn off. tried to clean with wet rag. knob finally turned off burner and would turn on and off, but the knob is not properly ...

Hello My side burner is leaking gas. I can hear the gas flowing even thought the knob is in the off position. But it doesn't click like all the other burners. Eddie If the gas you hear is coming ...

have a home depot ducane 5 burner. just replaced burner tubes. have never used the rotisserie burner on it before. it lights but won't stay lite after releasing knob...any suggestions? Thanks ...

...knobs Over the past 6 months we have slowly lost the piezo ignition from knobs for our stove top burners. The piezo is still sparking on all burners but 3 of the knobs no longer activate it when ...

Whirlpool How To My Whirlpool electric cooktop Model RCC3024 Front left burner not working. Not sure if its the knob or burner since before the burner stopped working, I used to be able to maneuver ...