...socket 478, dead Hi there.My mother board AOpen MX4LR, socket 478, dead, please help me. Power light on board is working, i cleared cmos-nothing, just cpu fan little jerked after that. Display screen ...
...Socket 478 Max supported CPUs qty 1 Memory Number of Memory Slots 4 x DIMMs Supported RAM speeds 400 MHz Max Supported RAM 4 GB so this is the board..no doubt that the cpu fits and is a good choice ...
socket 478) and I want to upgrade. Just wandering what P4 processors to look for. I think the socket is good for up to 3.4 GHz but I'm wandering what exactly this particular motherboard can handle. Hi
socket 478) has two SATA ports on the motherboard. However, SATA is not supported in the bios. I've read that if you force flash the bios with firmware from the EX661 (no L), then SATA will be enabled
...can be found here According to this page your Motherboard accepts a Pentium 4 processor on a socket 478 and a FSB of 400MHz so I would think it should support up to a 3.2GHz processor. Hope this ...
Question about AX4PER 845PE P4-533MHz DDR333/5.1/AGP4X/LAN/ATX Motherboard
...Socket 478. BIOS is current. Is it not plug and play? Hi, Does it POST and can you get into the BIOS? You need to set the FSB to 133MHz and the Ratio to 21x. (I am assuming you did install the CPU ...
Question about AX4B (91.89R01.001) Motherboard
Socket 478, and in Summer 2004 the CPU was released using the new
so yours is 775?
this had 6 sata ports. hummmm
AOpen AX4SPE MAX II nah but 2002 year
AOpen AX4B Pro-533 intel
...Socket 478 processor socket, http://en.wikipedia.org/wiki/Socket_478 The Processor has the contact pins (478 of them), and the processor socket has the socket holes. (478) The Maximum FSB supported ...
...Socket 478 processor socket. I had it happen to an old mobo in the past, with a Socket 478 processor socket; and no clips. I used a straight piece of coat hanger, and went from hole to hole, on one ...
Question about AX4SPE-UN Motherboard
Socket 478 533MHz Chipset Intel 845GV ( ding ding ding relic, bell rings) Intel ICH4 omg no SATA PORTS , NO PCI EXPRESS SLOTS . DEAD FOR NOT USEING 4 PIN AND 20 PSU CABLE TO PSU OOPS.BOTH POWER CABLES
Usually answered in minutes!
45 Questions
29 Questions
20 Questions
18 Questions
20 Questions