Questions & Answers for: HP basic chords Computers & Internet

power printer will not power on. screen keeps flashing, but power will not turn on hi, try this > connect the power chord directly to the wall socket. > check with different wall sockets. > unplug and

HP PhotoSmart C4180 All-in-One http://www.fixya.com/support/t203152-hp_photosmart_c4180_phantom_paper_jam from there, there are two solutions for a 'phantom' paper jam a) find a optical switch b) ...

...printer will not print any documents its a 5610 officejet, it wont print off notepad or word either basically nothing. the printer is telling me that it is not conneted at all but all of the chords ...

reset power when it 's plug in as you are getting the error RESET POWER.. turn off the printer..unplug the power chord..connect the printer directly to the wall outlet..and then turn on the ...

Printer keeps turning its self off after power surge 5 days ago HP2727NFS perform a POWER DRAIN. Steps to perform a power drain. 1. Switch off the printer and remove the power chord from the wall jack

c309a ink level shows low after replacing cartridge with cosco refilled original HP cartridges??? 1) remove all the orange tape from the cartridge properly... 2) plug in the power chord directly to ...

hp c5280 wont switch on, its been working well when last used this morning. Disconnect the power chord from the back of the printer. Wait for 40 seconds and connect it back and check if it is warming ...

the print cartridge can not move turn on the printer then try to move it manually.. if it does not work turn it off and try to move the carrriage manually. still does not work then do following steps.

Black ink does not print with a new printhead clean the printhead with a lint free cloth as well as the black ink cartridge... make sure you clean the copper contacts properly.. then put it back in...

stuck in sleep mode my pc is stuck on sleep mode and won't wake up remove the battery and unplug your power chord for 1 min. then plug your power chord back in and try to turn it back on. if it works ...