Questions & Answers for: cdj power

...cdj 1000 mk 1 will not turn on when power button is pressed on ? it works in the service mode (when in adjust and tempo are pressed together wilst pressing the on switch ) Check circuit protectors, ...

...power my cdj wont even turn on....the power is running to the cable to the cdj but nothing is happenin with the cdj itself....no power...any ideas...thanks in advance You probably have a bad ...

pioneer cdj 1000 mk2 not powering up cdj 1000 mk 2 will not power up.ive checked the lead thanks its the internal power supply its failed these are all like this expensive to do get it fixed and out ...

...cdj's). What's the problem here/where can I parts I am an aircraft mechanic not an electrician, but I narrowed it down to the power supply. Somewhere on the power supply there is a connection that is ...

Power problems My cdj 1000 mk2 Powers up and stays on for a little while then the power begins to flicker on and off Please make sure, power cable and fuse is working good.

cdj doesent power up i got my CDJ'S repaired by these guys www.technmics1210repair.co.uk i did they made my setup work like new so im going to spread the word. give them a shot

i have a CDJ 200 cd player the power when turned on there is no display YASH Hi Yash, pls make sure and check the fuse of your CDJ. Also check the power output that is 240v or 110v. thx, djajay

..."E-8301" (all CD's). Strange 'grinding' type noise on the motor when powering up the CDJ. CDJ 800 MK2 - quite old, but well looked after. - Is it worth getting i Getting a consistent ...

CDJ-400), turn on the power switch. 3. Continue holding the Eject button until the display shows "PIONEER CDJ-400." 4. Release the Eject button. 5. Press and hold the Track Search Forward (">>")

CDJ 1000 Mk3 says Power On then goes blank Hey there, so just got this CDJ 1000 MK3 in and every time I try power it up, it says 'Power On' then goes blank. I've looked at things like power lines and ...