...differential feed and stitich length should be for standard overlocking tasks. Can anyone help. Thanks Follow the link and you can view the instructions online ...
...differential feed do? I have my MIL's Eclipse serger and am wondering what the purpose of the differential feed is. I have read through the manual, though I find it very confusing, pictures and text ...
...differential feed. I think that you set it so that the setting is less than 1 to get it to feed in faster than out. If it isn't working, try a higher number. If you can't get enough this way, the old ...
...differential feed on your machine, sergers love stretchy things. Try widening the stitch you are using and turn your differential feed down one notch to allow the machine to get a good grip on the ...
Question about Speedylock 1600 Mechanical Sewing Machine
differential feed (top tension is different from bottom and fabric feed rate can be different from bottom). turn the dials for tension and feed rates to adjust. Adjust bottom tension to tighten bottom
Question about Speedylock 1600 Mechanical Sewing Machine
...feed. The differential feed is usually on the right side, you will see a some numbers. Their should be one that sticks out (might be red, The letter "N", "0", or a line) This is the normal setting. A ...
...differential feed on my babylock 5380E The differntial feed is usually set on N. If you move the lever up, you gather. If you move it down, the fabric will lettuce. These things happen because there ...
Question about MO-644D Mechanical Sewing Machine
...differential feed knob and stitch length knobs inside the cloth plate is on page 2. So swing open the left cover (cloth plate) to access these controls. Differential feed means you change the feeding ...
Question about MO-654DE 2-Needle 2/3/4 Thread Overlock Serger
...differential feed and stitch length set at 1.5 but the seam is very wavy and looks terrible I don't own a Juki, but I am familiar with sewing knits and with differential feed. I would suggest getting ...
Question about MO-654DE 2-Needle 2/3/4 Thread Overlock Serger
enough to feed fabric. Putting fabric in far enough to reach the back feed dog, everything works fine. Differential dial works fine. Lower the front feed dog The feed dogs probably need a re-alignment
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions
