Questions & Answers for: error no is 55.50

...? if so, it almost always flashes a 12 and 55. here is what they mean. 12 - direct power input to the PCM has been disconnected within the last 50 key-on cycles 55 - End of error ...

...mean anytime you do the self-diagnostic you will almost always get those 2 codes. 12 - direct power input to the PCM has been disconnected within the last 50 key-on cycles 55 - End of error ...

...55 Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but ...

error. Here is the Waste Tank Full reset. Canon BJC-50 BJC-55 BJC-80 BJC-85 M40 M70  1: Unplug Power Cord 2: Hold POWER and RESUME buttons 3: Plug in Power Cord  4: Release buttons after the

...also engine light flashes: one then two pause five then five. 12 Direct battery input to PCM was disconnected within the last 50 key-on cycles 55 End of error messages Those are codes too,see

...error 6/20/2009 12:55 Service control manager None 7022 error 6/22/2009 11:50 Service control manager None 7022 error 6/17/2009 9:54 W32Time 29error 6/17/2009 9:54 W32Time 29 error 6/17/2009 9:54 ...

...to PCM was disconnected within the last 50 key-on cycles 41-generator field not switching properly 55-end of error messages Check sparg plugs, ignition cables, fuel system (fuel filter,

error when it shouldn't. program light does not work I am not a repair professional. I am just a 78 year old man who has been making his own repairs for about 50 years. Therefore the washer ID doesn't

...end of the codes. This is also normal So if you have a 12, 55 code readout, you basically have no error codes stored. Here is a link that lists the code sand what they mean. OBD 1 Codes DodgeForum ...

...55 means that there are no other stored codes in the computer. http://answers.edmunds.com/question-95-5-2L-Jeep-Grand-Cherokee-Ltd-code-12-What-should-I-do-93723.aspx ...