Questions & Answers for: fix ant cable

can I do to fix it? HELLO. sounds like you need to go in the menu and find the setting for (air tv ant)/(cable tv ant), and reset.the setting to the cable ant setting. and see if that works "good luck

...ant, the other digital. The digital does not work I can not pick up any kind of signal. the digital tuner needs to be checked for soldering connections and if that don't fix it then you will need to ...

...ANT from the coaxiel cable to a red/yellow/white componate cable with no effect .... is there something wrong with my TV or is the cable box?? Thanks, Carl This is a problem i fix daily unfortunately ...

...fix this problem. Your TV is a Monitor. It doesn't have a built in tuner. That's why it doesn't have a Cable/Ant coaxial port. The TV needs a cable box for tuning or some other outside source box for ...

...ANT IN of the Teac HDB841. then on the back of your Teac HDB841, you have several output connection there like component, coax, s-video, rca and hdmi. since u have the hdtv u need to use the hdmi or ...

...fix.there is a cable that connects the two parts of the phone together this is the flex cable.the cable is damaged or broken that's wath your problem may be.ant the wobbling is due to a problem with ...

...if you are using the cable input, if you just want the channels scanned for a local antenna, then you need to go to the menu and go to programming and change the cable/ant to ant and

...ant cable, see if the cable is open or break test with VOM, this can produce erratic problem. 2) you have the options to go to the repair shop TV for fix.3) clean the contacts antenna TV, for dust, ...

...Ant (cable) input shows static and I change modes to watch netflix on the VGA input it immediately works without delay/static. I usually do this when the static gets on my nerves. How can I fix this ...

...ANT-A but it has the same problem either way. Projection TV Mitsubishi Model VS-55609 Serial# 105909 Thanks for ideas! I would suspect your cable box first. I would unplug the power cable from your ...