Questions & Answers for: furuno problems Computers & Internet

Question about GP32 GPS Receiver

2 Answers

Can't Receiver ( No Signal ) please bring me to solution about my problem GP 32 Furuno Can't signal ( No Signal ) I WOULD SUGGEST THE ARIEL BREAKING DOWN, OR AN INGRESS OF WATER IN THE COAX CABLE. IF ...

Ad

Question about 1715 LCD Radar System GPS Receiver

1 Answer

...any way to alter the circuit board to bypass the start switch? I had exact the same problem with my furuno 1621, Furuno in Netherlands also say needs new mother board (650 euro!) Problem is fixed ...

Ad

Question about GP31 GPS Receiver

2 Answers

LCD furuno GP31 Lcd is brooken, how to i gate it this LCD Contact your local West Marine, Boater's World or contact Furuno directly. http://www.furuno.com/ Even Im facing the same problem, when I gave

Question about 1715 LCD Radar System GPS Receiver

3 Answers

furuno 1621 radar will not power up my furuno 1621 will not turn on.. With a voltmeter, verify that you are getting 12V at the plug end of the power cable. If so, check the fuses (there should be one ...

Question about 1623 Radar 16nm Range

1 Answer

furuno radar 1621 do not show targets furuno radar 1621 starts, antena rotating but NO targets displayed. Shows only random dots - something like a "noise". Radar was transmiting for 58 hrs total. The

Question about 1650wf/Nt Gps/Chartplotter/Fishfinder

1 Answer

my furuno chartplotter is out about 2 km on the chart how do i correct this problem it is a furuno 1650wf Make sure your time offset is correct and also make sure you have not accidentally offset the ...

Question about 1623 Radar 16nm Range

1 Answer

...Furuno ls 6000 Go to the website: http://www.furunousa.com. Search under the previous products, fishfinders, display size 6". Under either one you will be able to download the manual for free. If you ...

Question about NavPilot 511 GPS Receiver

1 Answer

My furuno autopilot 511 has a rudder reference unit which worked and then stopped displaying rudder position. I assumed it broke and replaced it. I still get no display. How can I clear the unit. I ...

Question about NavNet vx2 1724C GPS Receiver

1 Answer

Furuno MFD12 Navet freezing and needing to be rebooted When using the mfd12 Furuno navet system it freezes and I need to hold down the power button, turn off and then turn back on. The process takes ...

have a furuno fr240 mark 2 and rafar image return only when changing range. also when given time image slowly returns but later radar dies. what problem can it be? Of course this could be many things,

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...