Questions & Answers for: goldstar float switch

Goldstar DH504el The "bucket full" light stays on. I run the dehumidifier through a hose to a drain in the floor. The front bucket is installed correctly. What else could it be? Check the float switch

...goldstar dh304 Just fixed mine. Problem on mine was with the POT. The POT on the unit varies the humidity control. Remove the drawer and remove the two screws for the cover then take a straight ...

...happening to me. Eventually it stopped turning on altogether. Have you emplied the water tank? There is a float switch that turns the unit off when the water tank is full of water. Please rate ...

wont work. water indicator light blinks red you are having a problem with the float switch located at the back of the water tank.

...float in the bucket and there is a replacement available part # AP3136674,on some units depending on the mounting hole size,you may need to use some old switch mounting parts on the new switch so it ...

...switch on. I electricially checked the compressor and fan both ok. PCB board? Jim, you may also want to check the water bucket installation, too. If it is not properly installed, the unit will not ...

...GoldStar energy star, model # DH404EY7. Thanks! This generally occurs for two reasons. 1. The float valve in the top of the bucket (if yours is so equipped) is stuck in the 'UP' position. ...

...float valve, to make it works freely. 2. The water collection bucket is not installed properly and water is leaking out the back of the top of the bucket. When installing the bucket, be sure it's ...

goldstar dehumifer that only worked in year. it will not come on. i have cleaned the filter. it has an automatic shut off if the basket is full. how do i get this to work again First, be sure that the

...goldstar dehumidifier does not shut off when full, cannot adjust the control panels There has to be a float switch or sensor that detects the full condition. You may find that the non-functioning ...