Questions & Answers for: half screen mirror

...screen is viewable only half of the image is viewable on my screen. the right side of the screen is dark You would be wrong. Lamps do not do that. They either work or they don't, they do not cast ...

...Half the screen has dashes in Lilac and other colors see thru?. It worked fine for 2 years then one day this happened The mirror is located right behind the screen. If the mirror is not damaged, the ...

half screen, mirrored on bottom half of screen Help! Picture displayed on top half of screen then line through the middle of screen with a mirror image of the top. (displayed upside down) Have several

...half of screen and dark patch in corner the bottom half of the screen seems darker than the rest and there is a dark patch in the corner. any ideas? Thanks for the picture - that's a big help. It ...

...half screen. The part of the screen that we can see has a good image, so I don't thing it is a problem with the lamp, so can you give an idea how can I repair it? thank you agumotta@gmail.com It can ...

half to free up some room. Take a dry scratch-free cloth and wipe the dust from the lenses. If they're grimy, use a little lens cleaner (liquids used sparingly here, electronics don't like liquids, be

...half of the TV and give you access to the screen. Make sure you do not break the mirror that is attached to the rear of the TV set. Clean the screen with a damp non-abrasive cloth dry with a dry ...

...half, then remove the front lower section by taking out the few rear screws holding it, then there is another piece just below the screen that pulls off revealing the last few screws holding the top ...

...screen is green and it seems to be split in half. It's like everything is mirrored from the bottom onto the top of the screen. If you mean only on lcd screen and not in video out,then must be problem ...

...screen has split in half horizontally mirroring the top with the bottom. The screen images are split into to mirror images. Back-light problem. Check and replace damaged component/s at its back-light ...