Questions & Answers for: Xerox initialisation failed Computers & Internet

On start up message 'disc failure 19.1' comes on. Hi guys, When I start the C2424, it goes through it's start up routine checking ram, usb etc. When it comes to the check on the disc drive it, fails ...

...am looking at buying a used xerox phaser 8200 printer it has an error when u turn it on during its initialisation process Thanks in advance 07,002.44: PM_FAULT_PROCESS_MOTOR_STALL Verify process ...

C4388 scan through wifi? when I try to scan using my HP C4388, the computer says, "scanner could not be initialised (scanner not found)" and on the printer it says, "you are not connected USB or ...

When you switch on machine it initialises and start booting. Suddenly it fails and error speed configuration appears Without knowing the model number I cant tell you what to do.

Windows cannot connect to printer. Operation failed with error 0x0000007e. This problem happens when you are trying to share printer between 32 bit (x86) and 64 bit (x64) Windows. The 32 bit driver ...

xerox 6400 hangs up at boot screen I hate to say this, but chances are either the software is corrupt or one of the two drives has failed. Your best bet is to call for a xerox authorized technician. ...

Color Registration failed I'm having an issue with the font having a shade behind the font and not aligned correctly. Tried the Color Registration to align the colors, but it fails, " color ...

After easing hard drive the machine will not power up but it won't go past the xerox home screen Very little info to work with, but try turning on with [start], [stop] and [4] keys pressed down. ...

The key card fails to register in the printer. I am changing cartridge, but failed to activate the tonner. Once the key fails. You will need to get a new toner box with a new key. The seller should be

sln for Xerox wc 5330 error code 092-315 092-315 ATC Fail RAP BSD-ON: BSD 9.3 - Development and Toner Dispense Control The frequency at which the ATC Average Fail or the ATC Amplitude Fail has been ...