Turn the computer off. 2) Find a paperclip. 3) Unfold the paperclip and you can insert it into a small hole on the front of the drive to remove any CD/DVD stuck inside. 4) Buy and install a new drive
Question about (SH-M522C/BEBN) CD-RW/DVD-ROM Combo Drive
straightened paper clip. does not work. no light, no response. stuck, stuck, stuck Shutdown the PC and try to insert straithtened paper clip in the small hole provided in front of the CD/DVD ROM drive
Question about MFC-7340 All-In-One Laser Printer
the front of the printer. Insert the envelope there. If it's a standard light weight envelope and it gets stuck still then I'd suggest there is a paper jam somewhere or possibly the fuser is going bad
stuck in lenovo y510, its not coming out. please help Insert a straightened paper clip into a tiny hole that is located on the front of the drive, typically right next to the eject switch. Once you've
...stuck disk. If that does not work, you will need to replace the drive. When you insert a disk, you can easily feel that an already stucked disk will block your way. If that happens, that means you ...
INSERTED THE WRONG KEY NOW IT IS STUCK INSERTED A KEY FROM ANOTHER GM VECHILE STUCK WILL NOT TURN OR PULL OUT Spray lock with wd-40. Gently rock key up and down (without pulling). Repeat this process ...
Question about 2001 Monte Carlo
...stuck on "insert used coffee" even though it is clean and empty and inserted properly? Must be a "stuck" sensor or switch that detects the issue. It may be dirty or broken. Look for a very small ...
Question about 19-2014 All-in-One Desktop PC - ENERGY STAR
disc inserted improperly now stuck disc inserted without opening tray, now cannot remove Carolyn: Take a butter knife (not a steak knife) and push the diskette into the drive the rest of the way, and ...
Question about Digital Electronic Safe Lockbox Gun Jewelry Lock Box Tool
...key is now stuck and won't rotate to remove. It said to insert and turn counter clockwise then move bolts to extended position and remove key but that is not working notify manufacturer or ...
Question about Digital Electronic Safe Lockbox Gun Jewelry Lock Box Tool
stuck at 'Insert Grounds Container' while it is already inserted? This will be a problem with the switch that registers it is there. Help in the link https://www.google.com/search?q=Esam+4500+stuck+at
Usually answered in minutes!
386 Questions
103 Questions
81 Questions
63 Questions