...receiver when new but dont want to spend too much on it as nobody has a fix that lasts. Do buy a new one, or can some repair this unit easily? Have you heard of this problem? I would estimate less ...
Question about DTR-9.1 7.1 Channels Receiver
...Integra 6.9 receiver Just bought an Integra 6.9 receiver and cannot get sound when playing CD or Dvd. Have great sound from the receiver though. Did the Audessy set-up already and that didn't fix the ...
turn on receiver and turns off immediately dtr-5 turn on receiver and turns off immediately whenever you touch buttons I have the same problem! Could you fix it
...dosnt get a signal from the hdmi inputs both ps3 and blu ray have the same problem it is a dtr 5.9 integra what you should do is make sure that your HDMI is cord is not in an awkard position, which ...
...integra dtr 6.8 protrection problems The audio output stage has load issue, check speaker wires for shorts, if okay! the problem is in the semiconductors and this is where a professional is ...
Question about Onkyo Rc-711m Dtr-4.9 / 5.9 Replacement Remote
"handshake" between DTR 5.9 and an LG Blu-ray player I have an Integra DTR 5.9 and an LG Blu-ray player, (plus DTV, which works fine!). My problem is that it take up to 30 minutes for the Blu-ray ...
Integra receiver clicking Zone 2 on and 5.1 You most likely have a power amp problem, disconnect all speakers and see if still does the clicking, if so you have an output amp problem
Question about Onkyo Integra Dtr-4.6 Av Receiver Wrat
I am not getting any audio (sound) out of my Integra DTR 4.6. Any suggestions? There is absolutely no audio coming out. Does the vu meter show anything(bars moving up and down when audio is present?If
Question about Dtr-7.8 Receiver
I have a Integra 7.8 it powers up. The problem the sounds cuts out now after 30 seconds or so. Then start making a popping sound in speakers after that. system has been installed for 6 yrs if there is
Question about Dtr-7.8 Receiver
...integra av receiver model no DTR-70.1 amplifier displays but no sound what could be the problem? http://www.integrahometheater.com/faqs.php Check the connections and try a master reset? Perform a ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions