...Your line problem resides on the small, rectangular glass at left. Just place the copy with lines on the copying glass and the lines will indicate where the spots are on the small glass. It ...
burnt screen my plasma has black vertical lines preventing me from watching tv properly black line through the tv This is usually caused by a dry joint on the vertical driver board or ribbon cable. ...
cracked or scratched screen I was listening to my Sansa e250, and my fingernail slipped when I was pressing pause. It made a small little line, and a crack noise, then I touched the screen, and it ...
wont print this printer has always worked and it functions all but the labels come out blank. Check to make sure you have direct thermal labels. You can test this by scratching your fingernail across ...
Lines on copies When I use the feeder for multiple copies, the copies come out with two lines about a 1/3 of the way on the inside of the page, but the lines are not present when I place the item to ...
Question about SLX-2 Handheld Wireless UHF Transmitter SLX2B87AH5 Microphone
fingernails have mangled the rubber on-off button. Replacement? Bought 3 of these a year and a half to two years ago for my church. The rubber on-off button on the PGX2 (616A-SLX2) has been destroyed ...
How do I ''Replace the Battery'' on a Honeywell 97-3893 Thermostat. The unit is blinking ''replace battery'' and I don't want to force opening anything. the unit has a split line where to top meets ...
Question about UX A260 Plain Paper Thermal transfer Fax
i get a black line on my faxes or copies - i have a sharp UA260. i even cleaned the roller and scanning glass per manual. Your problem is most likely something stuck on the scanner glass that is ...
There are white line in the paper Are you using back paper? Hello, Assuming that you are talking about a copier, and you are using the automatic document feeder, you need to check the small glass ...
Question about UX A260 Plain Paper Thermal transfer Fax
Got 2 lines on my crank pulley. 1st is well defined, about 1/8 inch thick and deep. 2nd line is fingernail thick, not nearly as well defined. Which is my timing mark and why 2 lines anyway? Hi ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,161 Questions
2,149 Questions
1,912 Questions