Questions & Answers for: macbook pro top case

...Macbook Pro 10.4) Any recommendations as to what brand replacement case will work or what specifications to look for? Problem may not be the case. If you holding the cord the port that the cord hooks ...

MacBook Pro 17" The bottom of the computer case gets extremely hot after running a short period of time THis is normal. It is based on the amount of CPU being used. If you are running a lot of apps or

...macbook Pro models have KB backlighting so without a motherboard change you are probably out of luck The top case on the mac unibody can be replaced to provide for a back light on the keyboard. You ...

...Macbook Pro? Because macbook pro has a unibody which can not easily get the keys back into position if they popped off. This happened to my "g" key and when I took it to the Apple Store, all he did ...

...Macbook Pro will resolve the issue, but in some cases it can take a specific procedure to correct and prevent a kernel panic from occurring again. So here are a few procedures you can use to resolve ...

...top-end MacBook Air 13.3" 4 GB/256 GB for presentations. I also have a Dell M410HD projector, also quite new (a few months old), which works great with the two PCs (one new, one old) I used ...

...Macbook Pro I bought in 2007. I have read Apple had problems with the 2007-08 models with the graphics card that caused problems with the motherboard. I don't have much money to spend on fixing ...

cooling fans A2121 change cooling fans you will need to remove the battery remove the top casing where keyboard seats once thats remove you will be able to see the fans and can be remove pretty easy.

MacBook Pro won't boot at all Hi there. My mac wont boot at all. I took it in to be fixed but it only worked for 2 days. They said it could have been an SMC corruption which they reset or it could

...case sensitive. You can easily change password. Put in original disk, restart and hold down C, once it has come up with languages say continue. Top bar appears and in that bar as a drop down is reset ...