...message light go away when there are no messages - remove the handset from the base and press and hold the "find handset" key for 5 seconds. Resets it! Hooray! I have a powermax 5.8ghz phone and I do ...
...message for incoming calls. Please give me instructions to do so. Thank you. press menu on the base. use the volume up and down buttons to change to the answ. setup go to greeting and follow the menu ...
Uniden DECT 6.0 phone setup and can't remember how to access my messages from a remote location. I have my two digit access code but can't remember if it's a #, *, and if it's before the code or what.
message information has gotten out of synch with the voice mail system. In that case, reset the unit to the "No messages waiting". At the base, press Menu/Select. Select the Global Setup Menu and then
Setup" and press OK. Press the START softkey. You will hear "Record Greeting." Record your message and press the STOP softkey when done. If you need a manual, you can download one at http://www.uniden
Question about 2.4 GHz Expandable Phone System with Digital Answering Machine
setup a message box on an Uniden 2.4GHz phone? Uniden makes many different 2.4GHz cordless phones. I have included a link where you can download the manual for your model number if you need it. Send a
Question about DECT 6.0 Cordless Phone ID
...message is no longer setup on the phone. How do I reset an outgoing message for the digital answering machine? Since you didn't specify the model of your Uniden DECT 6.0 system I can only suggest you ...
...message. Searhing setup didn't allow me to change the message. To replace the default greeting with a personal one ( Uniden model D1680 & similar ): 1. press [MENU] 2. scroll to "Ans. Setup" then ...
Question about DECT15805 Cordless Phone
...message. Now, press Menu/Select, scroll through the menu to Ans. Setup. Select this and search for Record Time. Select this and choose the recording time of 1 or 4 minutes. Press Menu/Select again to ...
Question about DECT15805 Cordless Phone
message light keeps flashing even though there are bo messages I have gone to the menu button and selected global setup and then selected VMWI reset and sel and then pressed sel and then changed no to
Usually answered in minutes!
3,454 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions
