...locked. It also kicks tapes out without even reading them- a lot. this is probably due to a stuck microswitch in the tape drive unit as the locked tag presses a microswitch when loaded it is ...
Question about DDS SDT-D11000/ME DAT Tape Drive
...163;200 to replace, could be time for a new projector Its not necessarily the bulb. The cover has a microswitch. On the cover you will find a tongue which goes into a hole on the projector where the ...
my player opens and closes continuously after switching it on, its only a month old Here are a few possible fixes : 1. Open the micro switches, cleaning the contacts and streching the springs inside ...
Question about FD Trinitron WEGA KV-24FS120 24" TV
volume up and down arrows when pushed changes the channel video 1 2 3 Hello Internal microswitches fitted on the main board of your tv is faulty. Replace all of them at the same time. It won't cost ...
...Before the camera will take pictures, it's necessary that this slider on the card operates a microswitch in the camera, which it will only do if it's NOT in the 'lock' position. The slider ...
Question about Cybershot DSC-T200 Digital Camera
...Before the camera will take pictures, it's necessary that this slider on the card operates a microswitch in the camera, which it will only do if it's NOT in the 'lock' position. The slider ...
the wiring and battery voltage levels check out fine then, try resetting the unit by using the microswitch behind the face unit. if this does not work then make sure that ALL the switches on
Question about 1-487-500-31 Wireless Mouse Vgp-Wms4 black P/N: 1-487-500-31 -
...>$100 for a new one .... no way! I have the same model of mouse, and ended up replacing the microswitches rather than buying a new one - relatively straightforward, but I've been soldering
...not working If under warranty, contact Sony. If out of warranty, then you need to replace the microswitch. Involves soldering, heat, wires, remove and replace, obtaining a new switch...save the ...
...plastic button having been pressed down a little too hard and breaking off internally, jamming the microswitch behind it that it operates. I have encountered this situation many times in other ...
Usually answered in minutes!
606 Questions
252 Questions
223 Questions
195 Questions
195 Questions
