Questions & Answers for: Mercury multi function switch Computers & Internet

Question about 2004 Grand Marquis

1 Answer

...multi-function switch). The part number is S14349 from BWD. My wipers wouldn't turn off and sometimes headlights wouldn't turn on unless I held the hi-beam switch back for about 5 seconds. After I ...

Ad

...Multi-Function Switch Removal WARNING: THE ELECTRICAL CIRCUIT NECESSARY FOR AIR BAG DEPLOYMENT IS POWERED DIRECTLY FROM THE BATTERY. TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE PERSONAL INJURY, THE ...

Ad

My windshield wipers only work once each time I turn it on. The motor works. How do you test the wiper governor. There isn't one. you probably need a Multi-function switch

Flasher lights stay on when car is running and the dash lights do not work. Turn signals work fine. Any ideas on how to fix this? turn signal switch (multi function switch)

...multi function switch or the multi function relay? Where do I find the relay if it needs replacing? Thanks, Glen it would be good to know which vehicle we are referring to. Most vehicles the relays ...

Question about 1996 Cougar XR7

1 Answer

...multi-function switch located in the steering column. The switch can be replaced by removing the ignition switch, the upper an lower steering column covers (there are 3 screws recessed in the lower ...

...multi-function switch in the column. So its possible the turn signal switch has failed. And it could be shorted out to the point of draining the battery. I would unplug the switch and check to see if ...

Question about 2005 Mariner Premier

1 Answer

...multi-function switch 2005 mariner right tail light works on ignition but doe not work with turn signal, brake, or hazards. Is this the multi-function switch, or something else? Either way, how do I ...

...on the dash and the muti function switch on the steering column and the fuse continues to pop. Could this be a short in the wiring somewhere? yes possible get a multi -= meter and check for ...

Multi-function switch (13K359). GO to Pinpoint Test A . The Low Beams Are Inoperative Circuitry. Multi-function switch. GO to Pinpoint Test B . The High Beams Are Inoperative Fuse(s). Circuitry. Multi

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...