Questions & Answers for: HP neck problems Computers & Internet

...table surface/ have a fat magazine ready to support the circuit board/ avoid stressing the CRT neck/ stay away from the HV anode lead (plugged into the back of the CRT) and avoid touching the ...

...advice. Hey chips 53 Very simple, Go to the market and purchase a set of screw driver of long sleek neck (for star screw). and open the four screw present four different side in the printer. After ...

hpvs15 monitor problem it creates little sadow behind the icon 1. dry points in neck board. 2. R G B capacitors & pf 3. adjust the yoke presets

...to enter setup. please what do i do. PLEASE I WOULD LOVE TO GET ANSWES NOW MY CUSTOMERS ARE ON MY NECK now what yu will need to do is press on the f10 key to enter bios setup. at bios setup, go to ...

...in one of two places. Most commonly they are on the small circuit board you'll find right at the neck of the picture tube. Some monitors have them on the main circuit board. They may be mounted to ...

...is there anything I can do about it? 1. Adjust the LOT screen preset. 2. Trace the G1 path , LOT to neck board. Sum times diode are capacitor problem. 3. LOT sarounds one 10Mf / 450 V capacitor ...

...issues. This is what you posted: 1. Adjust the LOT screen preset. 2. Trace the G1 path , LOT to neck board. Sum times diode are capacitor problem. 3. LOT sarounds one 10Mf / 450 V capacitor bad ...

...I first have to return to an earlier date using SYSTEM RESTORE (Win-XP). This is a pain in the neck, but if I don't do it this way, the printer starts going through "dialing" and since it isn't ...

...if something might have broken off, or is there a way of locking the base onto the monitor neck. Good day to you. This is simply a loose base connector problem. The best way to tighten the ...

...horizontal deflection amplifier that supplys the signal to the horizontal deflection coils on the neck of the picture tube. I think it's the sweep transformer. ...