Needle keeps falling out of Pfaff Creativ 2170 I use this machine for embroidery and recently the needles have been falling out of their holder. I insert the needle the correct way and tighten the ...
thing falls down the thing by the needle, im not sure what itz called, but it keeps falling down and wen i try 2 put it together it still falls down. look for the nut in the needle holder and tight it
Question about LS-2125 Mechanical Sewing Machine
Every time I use my machine quilting foot, my needle falls out. It doesn't fall out with my regulary one...I have changed the needle, thread, rebobbined, etc. and have had no sucess. My sewing machine
falling my needle keeps falling down, not out of the needle holder, but the whole contraption keeps falling down. did i break something? i feel like something needs to be tightened or something, but i
viking quilt designer ii the sewing needle falls out of teh needle shaft First of all is the needle the correct needle for your machine. Some needles go "flat to back" while others are put in ...
Question about 7444 Mechanical Sewing Machine
...needle (or part) to keep it from falling in the machine. Turn the screw counter clockwise (to the left) to loosen. Insert the new needle and tighten. It's not necessary to remove the screw entirely, ...
I am sewing leather with bernina. Got proper leather middle but the needle either gets stuck or falls out. Why and what should I get that I can work with heavy leather ( FYI I am not working with ...
Question about 7444 Mechanical Sewing Machine
...needle bar from falling out A little boot shape metal goes in needle bar then needle. Needle bar has opening on left to slide it in, but it falls out. Help I can only suggest the repair shop on this ...
my needle keeps falling out I replaced the screw but still I cant keep the needle in Have you changed needle type? Is the needle lock screw out far enough to allow the needle to go up high enough?
Question about Viking 1
...needle keeps falling out. I unscrewed the set screw, put the new needle in, then it falls out. I had just taken out an old needle by unscrewing the set screw and didn't touch anything else. Help Be ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions