Questions & Answers for: nt1a work

...NT1A that i'm having trouble getting a recording signal with. Even with Phantom power on and levels up crazy high it won't pick up a vocal, or very little. If I tap the mic head it spikes sharply in ...

works for a few seconds then cuts out my nt1a works for a few seconds then cuts out-lead, channel, ok. Phantom power switched on colin gibson After trying a known good cable, I would try it on another

Does the NT1A work with the M-Audio MobilePre USB preamp? The NT1-A will work with any mic preamp that has phantom power.

...NT1A, it comes with a shock mount, pop filter, xlr cable etc. What else besides a USB converter cable to I need to have this mic work it's full potential on a PC? Hi, what else do you do think you ...

My Rode NT1a is not working, I have checked the phantom power and all cables which are ok. If it is under warranty, I recommend sending it to Rode for repair. Otherwise, I can service any Rode mic. ...

...phantom power (48V) to get it powered up. Without phantom power, the NT1A won't work. You many need to buy an external audio interface that provides phantom power to use the mic. Hope that

Trakmaster Pro) with phantom +48v. i got an M-Audiophile 2496 installed to the comp. and a mic Rode nt1A. Eveything is plugged in and installed and iv'e recorded songs many times before. i was without

...Nt1A also stopped working. I think its because i took the silica gel bag from the case. Should i always keep the mic inside the case after the usage. and i dont use a pop up filter Removing the ...

...NT1a Hum and cut out The Microphone seems to make a hum and work for around 5 seconds then cuts out and I hear nothing. Just want to see if there is a loose connection somewhere? I have opened it up ...

My Rode NT1a stopped working. I checked preamps My Rode NT1a stopped working. I checked preamps with a phantom power (i use "Art Voice channel" and sometimes kinds of lower class preamp like a ...