...jam. Open the rear door and inspect the paper sensor located in the fuser assembly. See if it came out of it's original position or if there is something blocking it from moving freely. Good
...fuser Wow i've worked on old printers but this is the the cream. 1-Open back door and remove the back cover ( two screws) 2-remove the top cover. 3- remove the cleaning pad cover and the pad, 4-take ...
...are blown in the fuser. looking at the back of the printer the outer rear cover door remove it by opening to a 45 degree angle and lift it off. on the inner rear cover there are to flat head screws ...
...Fuser Error - Open circuit detected in thermistor circuit. The thermistor provides feedback on the temperature of the fuser roller and when it fails, the fuser normally does not heat up. It means ...
...Open the top cover. 3. Loosen the green thumbscrews on the fuser. (caution the fuser can be hot) 4. Pull the fuser straight up and out of the unit using handles on either end ot the fuser. (darker ...
hi, my lexmark T640 is saying 202.06 paper jam, check rear door. i have opened it and there is no jam, there is no paper anywhere and have pulled all the trays out and there is no jam. what do you ...
...fuser oil coating roller. If the thermal fuse is open, just replace it. If there is continuity, and the thermostat is good, only replace the power supply. If this doesn't fix the problem, replace ...
How do I replace a fuser on a Lexmark C752? por open right hand door drop lower door on fuser is two green leavers pull them to middle take old fuser out and replace the same way
Paper jam in fuser unit Can I open the fuser unit to clear the paper jam? Sure you can open the fuser. But if the problem returns you better put in an other fuser
...Open the fuser cover 04: Remove the fuser 05: Remove the new fuser from the packaging 06: Insert the fuser 07: Close the fuser cover 08: Attach the top rear door 09: Lift the paper bail, and then ...
Usually answered in minutes!
3 Questions
4 Questions
3 Questions
