Questions & Answers for: Epson paper stuck Computers & Internet

...paper stuck in the mechanism therefore I am stuck!! Anybody any ideas? Suggest a small piece of paper or dirt is stuck in the print path near the print heads. Use vacuum tube to **** out any dirt i'm ...

...and remove any paper that got stuck. If they are stuck between the rollers, gently pull them out. Look for any tiny paper shreds that might be blocking a sensor or might as well stuck between

stuck paper from inside the machine. I've done all this but am still getting the same message. Could this be a paper feeder malfunction? Usually, it's caused by carriage error. Turn on printer without

...paper stuck there 3. Locate the button to open the printer, open it and remove any paper stuck there also. 4. Repeate the above step for all buttons that you can find to access the inside of the ...

...paper is stuck inside, turn off the Epson Stylus CX. Open the scanner, remove the jammed paper and torn pieces, close the scanner, and turn the Epson Stylus CX back on. Note: Be sure to check the far ...

stuck paper is visible manually remove it.* Remove all paper trays and any paper that may be stuck between the tray and the printer. If the stuck paper is visible manually remove it.* Open the printer

Epson Stylus SX405 displays paper jam error alert when there is no paper jam Make sure that there is no paper tear off stuck in the printer, one of the paper sensors may be stuck or damaged,

...paper is stuck inside, open the printer cover and remove the jammed paper, including any torn pieces. Then close the printer cover.If paper remains near the sheet feeder, press the paper feed roller ...

...paper gets stuck half ways i mean i can hear the printer still running and all but the paper doesnt roll down???? what should i do??? Hello, Turn the printer off. Please inspect the paper paths and ...

...stuck paper is visible manually remove it.*Remove all paper trays and any paper that may be stuck between the tray and the printer. If the stuck paper is visible manually remove it.*Open the printer ...