Questions & Answers for: IBM parallel set in use Computers & Internet

...parallel one on my laptop monitor and one on the adjacent external monitor? Thanks Tom have you tried Function F7/F8 ? Make sure that your display driver is installed correctly. I had the same Laptop ...

...set it up as a parallel printer with an HP Jetdirect card, and it's been working well. The problem is waking up from energy saver mode, it doesn't seem to want to do that. I set the mode for 60 ...

set up the print server. I have a DLink DIR-615 router at my home and have plugged the print server into the router, but cannot see it with the AXIS add printer utility or through directly pinging the

...parallel ATA bridge. However, version 4.00 or later of theDisk Fitness Test (DFT) will work. HDDTEST version 0.28 by Hitachi GST does not function properly for similar reasons. Instead, use HDDTEST ...

parallel functioning Hi, I'm running a winxp pro (sp3) on a Lenovo M55e desktop pc. I would like to keep a permanent connection between my pc and my home cinema system. Since keeping such a connection

...At ports tab change from tcp-ip to LPT1 Click apply Don't forget to connect your printer with parallel LPT ...

...set the IDE optical drive as master and leaved the bios settings as before: Parallel ATA: Primary Serial ATA: Enabled Native mode operation: Auto In this configuration the systems booted without any ...

...parallel port must be set to communicate in both directions. The SUB to Parallel adapter may be a ONE-WAY communications device. Get a new (or used) Epson scanner or Epson all-in-one ($50) which ...

parallel (Centronics). This is the easiest port toflash the printer through. If you need to change the download port to serial,see the note at the end of this article. At this point the display should

moving the right lever from A to B for example and see if it clears it out. Also might be your parallelism, you will find to hex screws on the right and left of the platen assy that u can adjust.