...behind the problem. 1. Check the driver settings & match it with the printer imulation. 2.Check the parallel cable. If not solved connect the printer to a new pc. some time computer's parallel port ...
I HAVE INSTALLED THE PRINTER ON TO MY TESTRIG (PC) AND PLUGGED IN THE PARALLEL CABLE IN AND LOOKS OK, BUT WHENI SEND A JOB TO IT, NOTHING HAPPENS. THE ON-LINE MESSAGE IS ON THE DISPLAY. HOW DO I GET ...
...set in the printer. Power the printer down. Step 2. Connect the printer to your computer using the parallel interface. Step 3. Power up the printer while holding down the following three keys on the ...
...Parallel Interface settings for the print server and set the following type of options; Speed of Connection- Set to the lowest available Bi-Directional Communication- Disable this you may need to ...
parallel interface has been set Uni-Directional. To do this, you need to follow these instructions. Set the printer to Offline. Press the Enter and LF keys together for approx 3 - 4 seconds. The alarm
Parallel port will not power up print server. May be your parallel port is disabled in BIOS setup. Enter BIOS setup (DEL key on some common boards, F1, F2, F8 or even F10 on some branded machines) to ...
...parallel interface setting. • Set the printer to Offline. • Press the Enter and LF keys together for approx 3 - 4 seconds. The alarm ...
Question about Line Matrix T6100 Printer
parallel interface either directly to a terminal or to an external print server like a JetDirect, the problem may be caused by bi-directional communication disrupting the printer in an unexpected way.
Usually answered in minutes!
1 Questions
2 Questions
1 Questions
