Questions & Answers for: pcu clean

PCU in & out, wiped clean, held in place as I closed the latch plate. I finally got a long, skinny cleaning brush (a wierd feather-duster thing my wife uses for cleaning tops of books on the bookcases

...clean toner off our lens ...causing horizonal streaks on the left side of our copies Toner spills can be cleaned with a cotton pad and alcohol. If excess toner appears do the following: You should ...

...clean is the sensor at the back, you will see a small black plastic spring loaded lever, push this down and wipe the sensor. Do not try to lift the lever back into position, it will spring back when ...

...CLEAN it, or did you replace the parts? If you just cleaned it, you should not have run either of those two SP settings. If you replaced the parts, most likely the blank image is due to the small ...

...Clean foil with simple tissue cloth or similar. 2. Toner powder build up on sensor. Remove PCU unit and using a vacuum and/or can of compressed air spray/**** off excess toner powder from sensor ...

Printer displaying "Service Req E511" and wont print Error E511 relates to the PCU (not detecting the transfer belt rotating). This appears to be common. Sometimes the belt can slide on the rollers to

...PCU). Clean the inside of the printer, just dust up excess ink laying around, gently with a dry paper towel. OK, on the PCU there is a wide black rubber band sort of thing... it's as wide as the ...

...the PCU did you conect the blue plug???? If this is not the case remove the PCU again and if you look deep down you will see a metalic shaft. Clean it and install again the PCU. Hope this helps ...

How to fix Drum & Cleaning Blade in PCU unit of Ricoh 1015 The PCU unit is one compact unit when included the OPC drum,drum cleaning blade,charge roller,developer .

...1315 this is a charge issue - a simple fix would be to remove the pcu and clean round its outside and then clean the contacts to it inside the machine - if this doesnt work the pcu needs stripping ...