Questions & Answers for: precise fill washer

won't agitate or spin belt is fine bad transmission The machine will fill, drain, and spin but will not go into the agitate mode

washer 6- 7 yrs old The tub filled with water but did not agitate or spin is this a fridge/freezer or a washing machine? ;-) (check title) if it's a wm, and the motor runs, then probably a broken/lose

...FILL WITH WATER. ANY IDEAS?? I HAVE TO TAKE THE PLUG OUT FROM THE MAINS TO STOP THE WATER sounds like a faulty water valve if not pcb or pressure switch sorry cannot be more precise but thats indesit ...

...washer i tried to restart the load but now its not doing anything does it fill with water yet?if so then its the lid safety switch that gone bad under the top lid,this will kill all cycles other than ...

...washer is hot and cold fill, and the cold one if it is just cold fill! If it stops filling with power removed it is more likely to be the control board wrongly opening the valve. Sorry but whichever ...

...when you initially load the washer, it does not start after water has filled the tub. What do you suggest? Handy Hippy's Guide to HE Bliss For a more precise canwer always post your model

...precise fill washer fill all the way up with water? there is never enough water to wash a full load of clothes. The store where I bought the machine says it will still clean t Sorry for all my ...

I have a cabrio top fill Washer model #WTW5500Xw1 that will not fill with water Both hot and cold water or just one type. Check the hose in line filters, they could be clogged.

...washer wont turn on at all, wont fill up,spin or rinse on any setting I put my laundry and detergent in, closed the lid and set my dial and pulled it out but nothing happens,its acting as if its not ...

...fill.(NF) this is not a water valve problem it is control board issue and there is a tech bulletin on it. Contact www.applienceparts.com for more precise assistance in repairing. You can also read ...