start up/shutting down printer green button says "shutting down" but it will not start or shut down! pulled all the plugs out of the printer, replaced them, bingo!
Question about PSC 1210v All-In-One InkJet Printer
...shut down the printer and computer, and then rebooted and tried to print another thing and I still get more copies of the first copy. Shut down, unhook the USB cable, turn computer on, shut down, ...
...Printer Board -B1 has a shut down function. It is for preventing corruption of the HDD. Be sure to turn off the main power switch after performing shutdown. To properly shut down the Color Network ...
Question about Officejet 6310 All-In-One InkJet Printer
Purchase a strip plug with power buttons for Monitor, CPU, Printer and Device 1 and 2. Shut down the PC normally then hit the Printer button on the strip plug. Viola printer off no worries. Good luck
Question about OfficeJet 6310 All-in-One Printer (Printer/Scanner/Copier/Fax) w/USB Printer Cable , Retail
printer will not shut down. I pressed the on/off button and held it down, but it will not shut down. It says it is shutting down, but that is as far as it goes. perform a reset on printer, it might be
...shut down printer,on light blinks about every 10 seconds.When I insert printer installation cd I get a "connect your printer"message,and following message "installation will not continue until you ...
...the printer as a network printer from your PC and not from the router. If the router is not acting as a print server, then you will loose the connection from the printer when you shut your pc ...
...printer so it can shut down all the way? Why isn't the printer closing?? Will force quitting everyday like this hurt the computer? Thanks KM NJ Your printers' app is keeping your Imac from shutting ...
...printer is saying to not shut it down by unplugging it or breaker switch? If that's the case simply hold the power button till it shuts down (if it doesn't shut off after 5 seconds release and it ...
...printer is causing it to shut down. If it is shutting down due to something internal, one possability is it has the wrong power going into it. a 110 volt power supply going into a 220 volt printer or ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,161 Questions
2,149 Questions
1,912 Questions