...damaged" printhead on, the printer sometimes works. Question:- Can a damaged printhead does its work or damaged printhead do nothing? sure..it can work on occassion, but over the medium to long term, ...
Question about PIXMA MX700 All-In-One InkJet Printer
...damaged when a printhead is forced into the carriage.If you've checked and resolved or found none of these to be a visible issue, try turning off the printer, turning it back on and then installing ...
it's possible the printhead is damaged but I'd give HP support a call first and request a replacement if you can (check the warranty on the printhead - they have this printed on them). Hope this helps
Question about Officejet Pro L7580 All-In-One InkJet Printer
...Printhead missing or damaged, replace the printhead' displays on the control panel. Insert the printhead into its color-coded slot. Press down firmly on the printhead to make sure the electrical ...
Question about Officejet Pro L7780 All-In-One InkJet Printer
...printhead is damaged and needs replacing. On the 7780 the printheads are separate from the ink cartridges. There are two printheads, one for black & yellow and another for cyan & magenta. If ...
...damaged the printhead or the printhead connections. I'd recommend removing the cartridges and then the printhead and check for any obvious signs of damage or soiling on the base of the printhead ...
Question about EASYSHARE 5300 All-In-One InkJet Printer
...printhead is damaged or broken, you may replace it yourself. Make sure your printer is turned on. Open the printer access door by lifting from the recessed hand-holds on the sides of the unit. The ...
Question about Officejet Pro L7590 All-in-One InkJet Printer
...Printhead missing or damaged, replace the printhead' displays on the control panel. Insert the printhead into its color-coded slot. Press down firmly on the printhead to make sure the electrical ...
Question about Pinnacle Pro901 All-in-one Inkjet Printer
after cleaning printhead printer says printhead needs cleaning I have already cleaned the printhead. I followed all directions and I still get th printhead needs cleaning. If that's the case, the ...
Question about Pinnacle Pro901
after cleaning printhead I still get the printhead error stating it needs cleaning. If that's the case, the printhead will need to be replaced. If your printer is still under warranty, you can ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,161 Questions
2,149 Questions
1,912 Questions
