Questions & Answers for: problems singer 9960

Singer 9960 will not work This is the second 9960 in a month with the same problem. The machine jammed and now doesn't work. The lights are all on but no one is home. Help! have you tried ...

...singer 9960 I am having problems with the bobbin jamming so I want to remove needle plate. How do you remove the screws? The screw driver that came with the machine does not get under the body of the ...

upper thread keeps breaking I have this problem too. I have traced the problem to a design fault in the thread path. The thread wares a groove in the casing and snaggs the tread causing it to stretch ...

my sewing machine jammed, not it won't turn on and reset Mine is doing the same thing. Have you found what the problem is? My email is laneytay@msn.com

...singer 9960 presser foot does not lift with presser footlifter Apparently the lifter is loose or broken. Remove front cover , check movement of lifter where lifter stops movement will be where your ...

...Singer Quantum Stylist 9960 is not sewing. I purchased this machine from Amazon 5/20/2013. I was using a zig zag type stitch and later changed it to regular stitching. The machine will not sew. ...

What is the most likely cause of a Quantum 9960 that powers on but won't start? Both foot pedal and button tried a few seconds after each hear a beep and screen says to release button/pedal. could be ...

Singer Quantum Stylist 9960? My reverse stitch button cuts the thread or just cycles the needle up or down. I'm hoping a reset will sort out the problem but I don't know how to do that and it isn't in

...singer quantum 9960 Bobbin thread is getting caught and tension seems off. How do I adjust it? the small flat spring on the bobbin holder under which you pull the thread is the tension setting for ...

...Singer 9960 bobbin winder could be caused by a few different things. One possibility is that the clutch is not properly engaging or disengaging. Another possibility is that the bobbin winder belt may ...